FAQ
Questions
- Product Information[SOFTBOY PRO | DRY TEC | OIL BOOTH | Other Products]
- Coating Technologies and Coating Systems
- Others
Product Information | SOFTBOY PRO
How do you know the coating material consumption volume?
How is the coating material consumption? (Smart Phone)
How long does it take for smart-phone cover-case coating?
How long does it take for cleaning or color change?
What is the number of rotations in coating by R-technology?
Will our regular workers be able to handle the robots?
What is the reason why the coating material consumption volume is reduced by R-technology?
How much space does the system occupy when installed?
What is the maximum size of work to be coated?
Why is it possible to shorten the coating time?
Is it possible to use UV-cured coatings?
What kind of technology is R-technology, revolving coating?
Are there any humidity control or anti-static measures?
Is it possible to do coating tests?
Is there any measure for inferior product with dust or seeding?
What are the differences between a usual balance-arm robot and Takubo’s?
Is it possible to make a super-luster coating?
How long φ is the largest diameter for the revolving coating jig?
What is the reason why works stop on the conveyor line during coating? (Line Dancer)
What kind of coating booth should we choose?
Is it possible to reproduce the teaching conditions abroad, which were generated in Japan?
Are there any qualifications required in order to handle the robot?
What is the safety measure for the robot?
How much is the electricity consumption of the robot?
What is the production capacity for smart-phone cover-case in Line Dancer?
Product Information | DRY TEC
What is the temperature distribution inside the oven?
What are the advantages of the product over electric drying ovens?
What about handling qualifications and notification?
Aren't there worries about dirt associated with hot air drying ovens?
Product Information | OIL BOOTH
How frequent does the oil need to be changed?
Does the product work with water soluble coatings?
Does the oil present any safety problems, such as the possibility of fire?
Product Information | Other Products
Is the reduction gear flange the same size as other manufacturers? (Explosion-proof Motor)
Can you support driving with a DC power supply ? (Explosion-proof Motor)
Are there any explosion protection restrictions on the ground wire ? (Explosion-proof motor)
Is there an English-language version of SHANX software ? (Explosion-proof Motor)
Which is appropriate for the encoder type in ABS batteries? (Explosion-proof Motor)
Can explosion-proof motors be used for moving parts ? (Explosion-proof Motor)
Is the junction box certified with the motor ? (Explosion-proof Motor)
You can set parameters from PCs. Can you use RS485 ? (Explosion-proof Motor)
What is the resolution of the motor encoder ? (Explosion-proof Motor)
What is the operation mode of each control mode in the standard amplifier ? (Explosion-proof Motor)
Is it possible to use the backside backing specification?
Is the top coat of indium paint resistant to scratches?
Can the top coat of indium paint be toned?
Can the middle coat of indium paint be applied directly to the substrate?
What are the precautions for using indium paint in the middle coat?
Is the middle coat of indium paint a colloidal formulation?
Does a thick layer of indium paint in the middle coat still transmit radio waves?
Why do you use "indium" for the middle coat of indium paint?
Does a medium coat of indium paint pass "electricity"?
Does the middle coat of indium paint pass "radio waves"?
What is the appropriate base material for the base coat of indium paint?
What is the basic color setting for a base coat of indium paint?
Is the finish of indium paint evaluated visually?
How long does indium paint last in an immersion test ?
Does Indium paint conform to China GB standards?
Is it possible to convert the Indium paint to UV paint?
Are there any materials that do not adhere to indium paint?
It looks like the drying time will be a little over. If so, will this cause any problems?
It says 15±2μ of under and top, but if it is over, will the quality deteriorate?
What is the difference between indium paint and silver mirror or complex ?
What is the luminosity of indium paint ?
Is it possible to adjust the color of the indium paint? And are color variations available?
Is indium paint durable against sunlight and rain?
How should we handle sludge from indium paint?
Can Indium paints be supplied overseas?
Can I select the output shaft key in the catalog ? (Explosion-proof Motor)
Which manufacturer can I use the sequencer ? (Explosion-proof Motor)
Is special equipment necessary between the sequencer and the amplifier ? (Explosion-proof Motor)
Is it possible not to use the junction box ? (Explosion-proof Motor)
Quick care for trouble in China is available? (Explosion-proof motor)
Is there 380V power supply dedicated to China, or does it use a converter ? (Explosion-proof Motor)
Can you make the cable longer, such as 20 m or longer ? (Explosion-proof Motor)
What is the response speed of the motor ? (Explosion-proof motor)
How long does it take to deliver ? (Explosion-proof Motor)
Do you apply the torque limiter to the internal setting of the servomotor ? (Explosion-proof Motor)
Can parameters be backed up without a PC ? (Explosion-proof Motor)
Can you connect by LAN ⇔ LAN ? (Explosion-proof Motor)
Can special cables be used for robots ? (Explosion-proof Motor)
How long is the cable of the explosion-proof motor ? (Explosion-proof Motor)
What is Parameter reference speed for BS amp. speed set? (Explosion-proof motor)
Coating Technologies and Coating Systems
Is there any measure for inferior product with dust or seeding?
Can we calculate the coating cost of the In. Mirror Coating System?
What other equipment is required besides coating robots? Can existing equipment be used?
Is it possible to downsize the system of 「In Mirror Coating System」?
What about recovery of waste heat?
Can the Indium Mirror Coating System be used in combination with automatic mixing equipment?
Are certifications required to handle the In. Mirror Coating?
Can you provide coating samples of the In. Mirror Coating system?
Are there any humidity control or anti-static measures?
What kind of technology is R-technology, revolving coating?
How can we consider introducing the In Mirror Coating system?
Why is it possible to shorten the coating time?
What is the maximum size of work to be coated?
What is the reason why the coating material consumption volume is reduced by R-technology?
What is the number of rotations in coating by R-technology?
How long does it take for smart-phone cover-case coating?
How long does it take for cleaning or color change?
How do you know the coating material consumption volume?
What is included in the In. Mirror Coating System?
How long φ is the largest diameter for the revolving coating jig?
Others
If your question is not covered in the FAQ, please contact us directly via the Inquiries page.