Products | Others
FAQ
Answers to questions we frequently receive at Takubo Engineering
Products | Others
- How should we handle sludge from indium paint?
- Is it possible to adjust the color of the indium paint? And are color variations available?
- It says 15±2μ of under and top, but if it is over, will the quality deteriorate?
- Is it possible to convert the Indium paint to UV paint?
- Is the finish of indium paint evaluated visually?
- Is ECO MIRROR 49 different from ECO MIRROR AGENT (also made by Musashi Paint and released about 2 years ago)?
- Can Indium paints be supplied overseas?
- How do we store indium paint?
- Is indium paint durable against sunlight and rain?
- What is the luminosity of indium paint ?
- What is the difference between indium paint and silver mirror or complex ?
- It looks like the drying time will be a little over. If so, will this cause any problems?
- Are there any materials that do not adhere to indium paint?
- Does Indium paint conform to China GB standards?
- How long does indium paint last in an immersion test ?
- Are coating defects (other than dust and particles) the same as with ordinary paint? (unevenness, etc.)
- Is it possible to use the backside backing specification?
- What is the basic color setting for a base coat of indium paint?
- What is the appropriate base material for the base coat of indium paint?
- Does the middle coat of indium paint pass "radio waves"?
- Does a medium coat of indium paint pass "electricity"?
- Why do you use "indium" for the middle coat of indium paint?
- How should we control the thickness of the middle coat (ultra-thin film) of indium paint in the middle coat?
- Does a thick layer of indium paint in the middle coat still transmit radio waves?
- Is the middle coat of indium paint a colloidal formulation?
- What are the precautions for using indium paint in the middle coat?
- Can the middle coat of indium paint be applied directly to the substrate?
- Can the top coat of indium paint be toned?
- Is the top coat of indium paint resistant to scratches?
- Are there any reduction gears directly connected to the explosion-proof motor ? (Explosion-proof Motor)
- What is the number of pulses per revolution for a small explosion-proof AC servo motor ? (Explosion-proof Motor)
- Can you support driving with a DC power supply ? (Explosion-proof Motor)
- Are there any explosion protection restrictions on the ground wire ? (Explosion-proof motor)
- Is the reduction gear flange the same size as other manufacturers? (Explosion-proof Motor)
- The servo amplifier manufactured by TOSHIBA MACHINE Co., Ltd. can be purchased and used directly ? (Explosion-proof Motor)
- There is a parameter input software as an option, but is it always necessary ? (Explosion-proof Motor)
- Is there an English-language version of SHANX software ? (Explosion-proof Motor)
- Which is appropriate for the encoder type in ABS batteries? (Explosion-proof Motor)
- Can explosion-proof motors be used for moving parts ? (Explosion-proof Motor)
- Is it unnecessary to protect the cable if it is certified for explosion-proof ? (Explosion-proof Motor)
- Is the junction box certified with the motor ? (Explosion-proof Motor)
- Are extension cables and cable grounds included in explosion-proof certification ? (Explosion-proof Motor)
- You can set parameters from PCs. Can you use RS485 ? (Explosion-proof Motor)
- Can I use it in an environment where aluminum, magnesium, and other combustibles are combustible ? (Explosion-proof Motor)
- Do you fall under the export license application of the Export Trade Control Ordinance ? (Explosion-proof Motor)
- What is the resolution of the motor encoder ? (Explosion-proof Motor)
- When installing SHANX, is there no problem even if I do not use specified the USB conversion cable ? (Explosion-proof Motor)
- What is the difference between the Standard Amplifier and the Tiny Positioner Amplifier ? (Explosion-proof Motor)
- What is the operation mode of each control mode in the standard amplifier ? (Explosion-proof Motor)
- The explosion-proof motor has no brake, but does not hold its position when the power is turned off ? (Explosion-proof Motor)
- Can I select the output shaft key in the catalog ? (Explosion-proof Motor)
- Which manufacturer can I use the sequencer ? (Explosion-proof Motor)
- Is special equipment necessary between the sequencer and the amplifier ? (Explosion-proof Motor)
- Is it possible not to use the junction box ? (Explosion-proof Motor)
- For explosion-proof standards, for China, "ExdIIBT4Gbx" is used, but what does bx at the end mean ? (Explosion-proof Motor)
- Quick care for trouble in China is available? (Explosion-proof motor)
- Is there 380V power supply dedicated to China, or does it use a converter ? (Explosion-proof Motor)
- Can you make the cable longer, such as 20 m or longer ? (Explosion-proof Motor)
- What is the response speed of the motor ? (Explosion-proof motor)
- How long does it take to deliver ? (Explosion-proof Motor)
- Do you apply the torque limiter to the internal setting of the servomotor ? (Explosion-proof Motor)
- Can parameters be backed up without a PC ? (Explosion-proof Motor)
- Can you connect by LAN ⇔ LAN ? (Explosion-proof Motor)
- What is the value of power consumption when the motor is operated without load ? (Explosion-proof Motor)
- Can special cables be used for robots ? (Explosion-proof Motor)
- What is the minimum bend radius at the fixed portion where the cable does not move ? (Explosion-proof Motor)
- How long is the cable of the explosion-proof motor ? (Explosion-proof Motor)
- What is Parameter reference speed for BS amp. speed set? (Explosion-proof motor)
- What is amplifier type? (Explosion-proof motor)
- Is it possible to use sedimentary paint including pearl or metallic substance or aggregate or something like that?
- How is the cleaning method?
- How is sludge processed?
Questions
- Product Information[SOFTBOY PRO | DRY TEC | OIL BOOTH | Other Products]
- Coating Technologies and Coating Systems
- Others
If your question is not covered in the FAQ, please contact us directly via the Inquiries page.