OIL BOOTH Simple Maintenance Guide
Collection Booth for Painting OIL BOOTH
Easy maintenance will keep OIL BOOTH's performance. The following maintenance tips will ensure a long and comfortable life for your OIL BOOTH.
◉Is paint sludge building up in the tank?
☞ Remove paint sludge. Sludge buildup will reduce the performance of the booth.
Note: After removing the sludge, refill the cleaning TABO OIL to the specified level.
◉Is the OIL flowing evenly across the front baffle plate?
☞ Adjust the bias of the OIL curtain.
Adjust the leveler plate at the top of the OIL BOOTH to make the OIL flow evenly.
☞ OIL viscosity reacts to ambient temperature. In cold regions, we recommend a looser TABO-Oil (Turbo Oil) #100. In hotter environments, we recommend the harder TABO-OIL #300; if you feel the OIL flow is too hard, you can adjust the viscosity by adding more #100.
◉Is the amount of OIL correct?
☞ Check the level of OIL.
Add oil according to the oil leveler in the tank behind the oil booth.
◉Is the air intake weak?
☞ Replace the filter.
Check the condition of the filter daily.
☞ Extreme clogging will reduce the performance of the booth. Check the manometer (pressure gauge) for normal values; 200 hPa is normal; clogged filters, etc. are to be expected at 300 hPa or higher. (The set value varies depending on the booth. Refer to the specification sheet.)
☞ Inspect the inside of the exhaust duct.
If the booth is used for a long time, paint sludge may clog the duct. Remove it.
Remove it.
◎The above operation method is also described in the instruction manual. If there is no description or you do not know how to use the water washing booth, please contact the Sales and Marketing Division.
Sales and Marketing Division TEL: +81-475-50-0211 FAX: +81-475-50-0231
2021.12
●TABO OIL No. 300 High viscosity (hard) For hot environments
●TABO OIL No. 100+300 Medium viscosity; can be used all year round
